AutoRAE 2 Cradle for QRAE 3
$1,944.00
Size: 6.50″ W x 12.60″ L x 4.65″ H (165 x 320 x 118 mm)
Weight: 2.16 lbs (0.98kg)
Power Supply: AC adapter (110V to 240V input, 12V output, 7.5A) Charges up to 10 instruments at a time
Cradles Supported: No additional cradles supported
Display: 2 seven-segment LEDs
Buttons: 2 buttons ([Bump] and [Cal])
Real Time Clock: Yes
Visual Alarm/ Indicators: Tri-color (red/green/yellow) LED lights
Audible Alarm: 90dB @ 12″ (30 cm)
Gas Inlet/ Outlet Ports: 3 inlets (1 dedicated fresh air inlet and 2 configurable calibration gas inlets); 1 exhaust port
Gas Port Connectors: Connectors with 200-series barbs, 1/8″ (3.18 mm) ID tubing
Gas Regulator: Demand-flow regulator (0 to 1,000 psig/70 bar)
Pump Flow Rate: NA for pumped instruments, (400 ml/min typical) for diffusion instruments
Data Storage: None. Data stored only on PC
PC Communications: USB (Type B) port for direct connection to PC
Printer Support: Direct printing on serial (RS-232) printers
Networking: Not supported
System Configuration: PC-based configuration via ProRAE Studio II software
Wall-mounting Accessory: Standard TS35 DIN rail
Operating Temperature: 32˚ F to 122˚ F (0˚ C to 50˚ C)
Operating Humidity: 5% to 95% relative humidity (non-condensing)
Compliance: CE
Warranty: 2-Year Limited Warranty