RAE Systems Software, Parts & Accessories
RAE Systems Software, Parts & Accessories
- 11.7 eV Interchangeable 1/4″ PID lamp (in ampoule)
- 10.6 eV Interchangeable 1/4″ PID lamp
- PRG CloudServer Service (5 year term)
- PRG CloudServer Service (2 year term)
- PRG CloudServer Service (3 year term)
- PRG CloudServer Service (4 year term)
- Alkaline battery adapter for 4 AA-sized batteries
- “Pelican” carrying case with custom foam
- Hard carrying case with custom foam to accommodate the instrument + desktop cradle + Accessories and Calibration Kits with 2 gas Cylinder and 2 regulators (accessories cradle instrument gas and regulators not included)
- PRG CloudServer Service (1 year term)
- IP-67 / decontamination valve (for temporary immersion)
- Travel charger / PC communications adapter (AC adapter or PC cable NOT included)
- Rechargeable Li-ion battery
- Protective rubber boot – yellow (pumped units)
- Protective rubber boot – yellow (diffusion units)
- Protective rubber boot – black (pumped units)
- 10.6 eV PID sensor maintenance kit (incl. sensor cap cap removal tool electrode panel)
- PID sensor cover removal tool (pack of 3)
- Swivel belt clip
- Formaldehyde (HCHO) sensor
- Dummy sensor (required if fewer than 5 sensors installed)
- EchoView Host Wireless Mini Controller 900 MHz
- Mesh Router
- Carbon Monoxide (CO) sensor (H2-compensated)
- Methyl Mercaptan (CH3-SH) sensor
- Hydrogen (H2) sensor
- Phosphine (PH3) sensor (up to 20 ppm reading)
- Hydrogen Chloride (HCl) sensor
- Chlorine (Cl2) sensor
- Sulfur Dioxide (SO2) sensor
- Nitric Oxide (Normally Open)sensor
- Nitrogen Dioxide (NO2) sensor
- Chlorine Dioxide (ClO2) sensor
- Phosgene (COCl2) sensor
- Carbon dioxide (CO2) NDIR sensor (up to 50000 ppm)
- Combustible NDIR sensor (0-100% LEL CH4)
- Combustible NDIR sensor (0-100% Vol. CH4) Please Note: Requires the catalytic % LEL sensor in the same instrument
- Hydrogen Cyanide (HCN) sensor
- Ammonia (NH3) sensor
- Hydrogen Fluoride (HF) sensor
- Ethylene Oxide (EtO-A) sensor (0 – 100 ppm; 1 ppm res.)
- Ethylene Oxide (EtO-B) sensor (0 – 10 ppm 0.1 ppm res.)
- Ethylene Oxide (EtO-C) sensor (0 – 500 ppm; 10 ppm res.)
- Phosphine (PH3) sensor (up to 1000 ppm reading)
- Oxygen (O2) sensor
- PID sensor (0.1 – 5000 ppm; 0.1 ppm res.; 10.6 eV lamp)
- PID sensor (1 – 1000 ppm; 1 ppm res.; 10.6 eV lamp)
- PID sensor (0.1 – 1000 ppm (benzene); 0.1 ppm res.; 9.8 eV lamp)
- CO+H2S
- Carbon Monoxide (CO) sensor (up to 500 ppm reading)
- Hydrogen Sulfide (H2S) sensor (up to 100 ppm reading)
- Gamma radiation sensor
- LEL sensor Combustible catalytic bead %
- PID ppb sensor (10 ppb – 2000 ppm; 10 ppb res.; 10.6 eV lamp)
- Carbon Monoxide (CO) sensor (up to 2000 ppm reading)
- Hydrogen Sulfide (H2S) sensor (up to 1000 ppm reading)
- RAELink3 Antenna
- RAELink3 Power Adapter
- Multi-lead (5) charging adapter 15 V AC/DC 4 A
- RAELink Antenna
- RAELink3 Magnetic Mount Cable Assembly
- Wall charging adapter 230 VAC to 9 VDC
- Universal wall charging adapter 110 VAC to 240 VAC 12VDC with international plug kit
- Charger (120/240 V AC to 15 V DC) for AreaRAE
- ATEX barrier box (required to maintain ATEX certification) when utilizing a wall charging adapter
- Replacement Battery for EchoView or Mesh Router 3.6V
- Wall charging adapter 120 VAC to 9 VDC
- Replacement Battery for EchoView or Mesh Router 3.6V (pack of 5)
- Vibration Alarm
- Rechargeable Ni-Cd battery pack 2.4 V 1100 mAh
- Alkaline battery adapter for 2 AAA batteries
- Tygon® tubing 1/8” ID (3mm) (10 feet or 3 meters)
- FEP-lined Tygon® tubing ¼” OD 1/8” ID (5 feet or 15 meter)
- Rubber float with sintered metal filter weight
- Tedlar Gas Bag 3 liter
- USB-to-serial cable
- Tygon® tubing (connects to Tedlar® bag) (10 feet or 3 m)
- Teflon® tubing 4 mm O.D. (fits Flex-I- Probe) (10 feet or 3 m)
- Teflon® tubing 1/16” ID (1.6 mm) (10 feet or 3 meters)
- Female Luer connector (pack of 25)
- Male Luer connector (pack of 20)
- PC communications cable
- Replacement charcoal filter for zeroing kit pack of 6
- Tool Kit
- Digital Multi Meter
- Replacement charcoal filter for zeroing kit pack of 2
- Charging cradle
- PID Sensor lamp cleaning kit (pack of 10)
- Lamp Cleaning Kit (without methanol bottle)
- Alkaline Battery adapter
- Re-chargeable Lithium-ion battery
- Slim Rubber Boot (Green)
- Slim Rubber Boot (Red) UL/CUL
- Travel Charger
- Rubber Boot with straps (Black) UL/CUL
- 11.7 eV 1/4″ PID lamp (in ampoule) (interchangeable)
- 9.8 eV Interchangeable 1/2″ PID lamp
- 9.8 eV Interchangeable 1/4″ PID lamp
- Slim Rubber Boot (Yellow) UL/CUL
- 10.6 eV Interchangeable 1/2″ PID lamp
- 10.6 eV “Super-bright” 1/2″ PID lamp
- 10.6 eV Interchangeable 1/2″ PID lamp
- 11.7 eV Interchangeable 1/2″ PID lamp
- 10.6 eV 1/4″ PID lamp (interchangeable)
- BioHarness Strap (XS-M strap)
- BioHarness Strap (M-XL strap)
- BioHarness Team kit
- Operational & Maintenance Manual
- RDK Ruggedized Host Kit with GPS option
- BioHarness Kit (XS-M strap)
- BioHarness Kit (M-XL strap)
- RAELink3 Remote Antenna with 50′ Cable Extension (902-928MHz)
- Antenna 902-928MHz
- RDK Ruggedized Host Kit
- Remote Antenna with 25′ Cable Extension (902-928MHz)
- RAELink2 Remote Antenna with 25′ Cable Extension (902-928MHz)
- RAELink3 Remote Antenna with 25′ Cable Extension (902-928MHz)
- Remote Antenna with 50′ Cable Extension (902-928MHz)
- Antenna Assembly for AreaRAE Detector
- Antenna magnetic mount base with 12′ cable (902-928MHz)
- RAELink3 Antenna for Magnetic Mount
- RAELink3 Cable Assembly Kit For DustTrackII
- Complete Solar Enclosure System
- SAFER Homeland Responder WEATHERPAK
- SAFER Homeland Responder Plume Measuring Software
- RAELink3 Mini Charger
- RAELink3 Cable Assembly
- RAELink3 Host Cable
- Rechargeable AreaRAE Steel Li-Ion Battery Pack
- Alkaline AreaRAE Steel Battery Adapter
- RAELink3 Rechargeable Li-Ion Battery Pack
- RAELink3 Alkaline Battery Pack
- Four-unit external charger for AreaRAE Lithium-Ion battery pack
- Charging station for single Lithium-Ion battery pack
- Rechargeable AreaRAE Li-Ion Battery Pack
- Alkaline AreaRAE Battery Adapter
- Surveyor’s Grade Tri-Pod
- Wall Mounted bracket
- Tripod Mounted Bracket
- Tripod Kit
- AreaRAE gas outlet adapter (pack of 5)
- AreaRAE inlet tube adapter (pack of 5)
- RAELink3 Kit
- RAELink3 Mesh Modem Kit
- Accessories and Calibration Kit (no monitor)
- Operational & Maintenance Manual
- Flexible inlet probe 6”
- Replacement C-filter (five cards with 10 each replacement filters)
- O-ring
- Sensor Assembly
- Sensor Assembly
- THP sensor kit
- Alkaline battery adapter for 4 AA batteries
- Accessories and benzene Calibration Kit (no monitor)
- O-ring for water trap
- Gas outlet port adapter with tubing
- Constant Flow Regulator Kit 3 ltr/min
- 7000 Series Yellow rubber boot
- Rechargeable NiMH battery pack 4.8 V 1250 mAh
- Leg harness/holster without belt
- Utility belt for holster
- Accessories and Calibration Kit (no monitor)
- Dilution fitting (nominal 1:1)
- Case hard case with foam (14″x12.5″x4.25″)
- Operational & Maintenance Manual
- Operational & Maintenance Manual
- Porous metal filter and O-ring kit (pack of 5)
- Pumped monitor calibration adapter
- External 25 mm filters (pack of 10; without adapter)
- External 25 mm filters (pack of 100) (without adapter)
- External PID zeroing filter
- Sampling Probe/Wand with insulated handle and self-Coiling Teflon tubing
- Remote Tygon Sample Draw Kit for pump equipped multi-sensor instruments.
- Remote Teflon® Sample Draw Kit 10′
- 15′ (5 m) Tygon® tubing w / male Luer fitting
- 15′ (5 m) Teflon® tubing w / male Luer fitting
- 15′ (5 m) Teflon® lined Tygon® tubing ¼” OD 1/8” ID w / male Luer fitting
- External 25 mm filter with adapter (pack of 5) (for barbed fittings)
- PID Sensor Assembly for 1/4″ PID lamps
- Earphone alarm with adapter
- Vibration alarm
- Inlet probe 3″ (7.6 cm)
- 15′ (5 m) Tygon® tubing adapter rubber float with sintered metal filter weight
- Constant-flow hand pump adapter w /o float 15′ (5 m) Tygon® tubing
- Charcoal filter for CO Sensor (pack of 10)
- Charcoal filter for CO Sensor (pack of 20)
- Accessories and Calibration Kit (no monitor)
- Upgrade to a full CSK Kit
- Accessories kit only – no gas or regulator
- Constant-flow hand pump 15′ (5 m) Tygon® tubing adapter rubber float with sintered metal filter weight Diffusion
- Membrane filters (pack of 5)
- Membrane filters (pack of 30)
- Constant Flow Regulator 1 ltr/min
- Automotive Charging Adapter (15V)
- 16′ Communication Cable
- 65′ Communication Cable
- Single unit charging station
- External filters (pack of 100) with 1 metal connector (45 mm .755 μm)
- Demand Flow Regulator for pumped instruments
- Automotive charging adapter 12VDC
- Tygon® to Teflon® Fitting (pack of 5)
- Collapsible aluminum remote access probe with insulated handle and 6.5′ (2 m) of Teflon tubing. Probe expands to 35″ overall length
- Organic vapor zeroing kit (charcoal filter trap)
- Connector spares kit (lamp housing gasket 2 metal filters 2 sensor and probe rubber adapters)
- External filters (pack of 5) with 1 metal connector (45 mm .755 μm)
- External filters (pack of 10) with 1 metal connector (45 mm .755 μm)
- Constant Flow Regulator .05 ltr/min